The fitting methods for the rear Haul Loop are more varied than for the front Haul Loop. The basic requirement is to get the strap around the rear sub-frame as easily as possible. Some applications may require the rear or side panels to be slightly modified allowing the strap to exit in the correct manner without being squashed between seat and plastics. Later KTM EXC fitment is actually to the black plastic grab areas under the fender (slightly back from the end of the subframe).I use my rear strap all the time, even for maneuvering in the garage or in/out of van, And also consider that when you change bike you can simply remove from old and add to new!!